• Production de bio-ethylene pour le developpement de nouveaux thermoplastiques verts

    Updated: 2011-05-31 04:02:54

  • Avantages et inconvénients des biotechnologies blanches – Un point de vue !

    Updated: 2011-05-31 04:02:54
    Le recours à des enzymes et des micro-organismes dans la fabrication de building blocks (synthons) répond à la fois à une volonté écologique et à des impératifs économiques. Avec quelques obstacles dont il faut s’accommoder. … « L’usage des biotechnologies blanches est indiqué pour les acteurs qui recherchent des procédés plus propres et économes [...]

  • Genetically modified algae – A point of view!

    Updated: 2011-05-31 04:02:54
    A number of companies are working on genetically modifying algae to speed growth, increase lipid content and favorably change the economics of fuel production. But some critics fear that gains in algae productivity could come at the expense of ecological health. Algae are everywhere. There are an estimated 50,000 species that produce around half [...]

  • A 100% biobased PET bottle

    Updated: 2011-05-31 04:02:54
    PepsiCo announced it has developed the world’s first PET plastic bottle made entirely from plant-based, fully renewable resources, enabling the company to manufacture a beverage container with a significantly reduced carbon footprint.PepsiCo’s “green” bottle is 100 percent recyclable and far surpasses existing industry technologies. The bottle is made from bio-based raw materials, including switch [...]

  • Should Bioplastics Be Banned from Organic Compost? – A point of view!

    Updated: 2011-05-31 04:02:54
    Should bioplastics be banned from organic compost heaps? Intervale Compost Products no longer accepts biodegradable utensils, because certain brands of “compostable cutlery” don’t actually break down as advertised. Forks, knives and spoons made from cornstarch were showing up barely changed after years of being buried in the dirt mounds, says general manager Dan Goossen. [...]

  • The first BioPreferred labels, from USDA

    Updated: 2011-05-31 04:02:54
    US Agriculture Deputy Secretary Kathleen Merrigan announced that NatureWorks is one of the first 11 companies approved to use USDA’s new product label under the department’s BioPreferred program. The announcement was made at a bio-based product meeting held in Glenwillow, Ohio. NatureWorks’ Ingeo biopolymer – made from plants not oil – is the market-leading [...]

  • A starch-based bioplastic awarded

    Updated: 2011-05-31 04:02:54
    The 2011 Frost & Sullivan European Product Differentiation Excellence Award in the Starch Polymers Market is presented to BIOP Biopolymer Technologies AG (BIOP Biopolymer Technologies) for BIOPAR®. A cutting-edge, starch-based, bio-plastic polymer, BIOPAR® is produced through a proprietary technology developed by BIOP Biopolymer Technologies and finds widespread application in the food and agriculture industries. [...]

  • To accelerate the growth of bio-based polylactic acid in packaging

    Updated: 2011-05-31 04:02:54
    Recent developments of Dupont include the adoption of DuPont™ Biomax® Strong 120 to help accelerate the growth of bio-based polylactic acid (PLA) polymers in packaging. Biomax® Strong 120 is a copolymer designed to modify Polylactic Acid (PLA) for improved toughness properties. According to DuPont research into new materials and opportunities for sustainable packaging, the [...]

  • Worldwide largest closed algae production plant in Spain

    Updated: 2011-05-31 04:02:54
    The algae production plant of the IGV GmbH Potsdam (Germany) was handed over ready for production and accepted by the Spanish Aurantia-group. The site is situated in the sun-drenched Andalusia in Southern Spain, near to Jerez. The photobioreactor = PBR has a total volume of 85.000 liter and is therefore the world’s largest closed [...]

  • Poland: A new bioplastic Market in Europe?

    Updated: 2011-05-31 04:02:54
    California-based manufacturer Cereplast has announced an agreement with BioWorks Pl to supply bioplastic resins to the Polish market. “In 2011, Poland has the potential to become a multi-million dollar bioplastics market and this partnership enables us to capture substantial marketshare,” Frederic Scheer, founder, chairman and CEO of Cereplast, said in a statement. … “The [...]

  • Development of biobased adipic acid

    Updated: 2011-05-31 04:02:54
    BioAmber, the market leader in biobased succinic acid, has entered into an exclusive licensing agreement with CELEXION LLC for technology related to the production of adipic acid and other chemical intermediates. The current market for adipic acid is close to 3 million tons per year, worth approximately $8 billion at current market prices. Over [...]

  • Bio-plastics catching up in India – A point of view!

    Updated: 2011-05-31 04:02:54
    … In these days when safe disposal of plastic waste poses a major challenge to local bodies, manufacturers of bio-plastics say that their products would be completely degradable. The materials currently used for bio-plastics are polylactic acids and starch-based polymers. S.Balakrishnan, assistant general manager, Harita NTI Ltd., a company that manufactures bio-based products, said [...]

  • Polymers from carbon monoxide

    Updated: 2011-05-31 04:02:54
    In a previous post, the production of polymers from carbon dioxide had been presented. Novomer is also commercializing an aluminum-based catalyst system which combines carbon monoxide, an inexpensive and sustainable feedstock, with ethylene oxide to create a versatile chemical intermediate called propiolactone. This chemical intermediate can be readily converted to different monomers such as [...]

  • New green plastic made from milk curd – Video Presentation

    Updated: 2011-05-31 04:02:54
    New bioplastics based on whey protein, used for making recyclable food packaging. – Related posts / Billets à lire, en complément : Protein-based bioplastics – Video Presentation Zein to create new skin Expanded foam packaging materials based on milk protein Share, Enjoy and Subscribe: Tweet

  • A joint venture for the production of biobased Polybutylene Succinate in Thailand

    Updated: 2011-05-31 04:02:54
    In a previous post, we reported that PTT was considering Japan’s Mitsubishi Chemical Corporation for a Joint Venture (JV). Now, PTT Public Company Limited (PTT) is pleased to announce a JV Agreement with Mitsubishi Chemical Corporation (MCC), the developer of bioplastic technology. Consequently, PTT and MCC has established PTT MCC Biochem Company Limited, the [...]

  • Follow me on twitter!

    Updated: 2011-05-31 04:02:54
    Bio-Pol Blog has been very active during more than 3 years (Since Feb. 2008), with around 600 posts and 1000 comments, in English, French, Spanish or Portuguese. All it needs now is to rest, a little bit! I have enjoyed during this period the interactions with you. Thank you very much for reading this blog! [...]

  • Les pôles de la chimie verte se regroupent en France

    Updated: 2011-05-31 04:02:54
    Les cinq pôles de compétitivité actifs dans le domaine de la chimie verte du végétal ont décidé de travailler ensemble. Le pôle Fibres (Lorraine-Alsace), IAR (industrie et agro ressources, en Champagne-Ardenne et Picardie), Axelera (Rhône-Alpes), Agrimip Innovation (Midi-Pyrénées) et Xylofutur (Aquitaine) se sont alliés au sein d’une nouvelle structure : l’Union des pôles de [...]

  • Development of the production of biobased 1,4-Butanediol

    Updated: 2011-05-31 04:02:54
    Genomatica and Tate & Lyle signed a joint development agreement for the demonstration-scale production of Genomatica’s Bio-BDO (1,4-butanediol). The Genomatica process produces the same BDO product that is currently made from a variety of petroleum-derived feedstocks, but uses 100% renewable feedstocks instead. BDO, an intermediate chemical with a $4 billion market worldwide, is used [...]

  • Polymères biodégradables et biosourcés

    Updated: 2011-05-31 04:02:54
    Le sujet principal de BIOPOL 2011 sont les polymères biodégradables et/ou biosourcés. Cette conférence internationale se tiendra à l’ECPM, à Strasbourg (France), du 29 au 31 Aout 2011. Elle en est à sa troisième version. Le site Web de la conférence est ici. La date limite pour soumettre un résumé est le 29 Avril, [...]

  • A new PLA plant in Thailand?

    Updated: 2011-05-31 04:02:54
    CSM‘s subsidiary Purac and Indorama Ventures PLC (IVL) are in discussions to set up a Polylactic acid (PLA) manufacturing facility in Thailand, with an initial capacity of 10,000 tons per annum being raised to 100,000 tons per annum after developing application specific grades. This product will be based on high purity (GMO free) Lactides produced [...]

  • Bioplastics: the path to the profitability can be unclear – A point of view!

    Updated: 2011-05-31 04:02:54
    Metabolix Inc is betting biodegradable beach toys and agricultural mulch films will help it revolutionize the plastics industry, though the company’s weak financial history is starting to try Wall Street’s patience. Metabolix uses polyhydroxyalkanoate chemicals, or PHAs, to make plastics that decompose naturally. PHAs are found in plant cells and are eaten by bacteria. [...]

  • First large scale production of nanocellulose

    Updated: 2011-05-31 04:02:54
    The world’s first pilot plant to produce nanocellulose was inaugurated by research company Innventia in Stockholm (Sweden). The facility makes it possible to produced nanocellulose on a large scale for the first time and is an important step towards the industrialisation of a new energy efficient manufacturing process. “ With larger volumes, we can [...]

  • Recent developments based on Mirel bioplastics

    Updated: 2011-05-31 04:02:54
    The world’s first line of biodegradable beach toys will debut this spring — bioplastic pails, cups and shovels that you likely won’t see washing up on shore a decade from now thanks to a Cambridge company’s technology. North Carolina-based Zoe b Organic, a distributor of BPA-free and organic products for babies and kids, will [...]

  • Production of polyhydroxyalkanoate (PHA) in tobacco

    Updated: 2011-05-31 04:02:54
    Metabolix, Inc., a leading industrial biotechnology company focused on developing clean, sustainable solutions for plastics, chemicals and energy, today announced the publication of its most recent scientific achievements in the development of advanced genetic engineering approaches to achieve high levels of polyhydroxyalkanoate (PHA) in non-food biomass crops. The plastid genome of the research crop [...]

  • The truth about bioplastics – A point of view!

    Updated: 2011-05-31 04:02:54
    Biodegradable plastics are going mainstream, but how green are they? … In fact, biodegradeable plastics have been used in niche applications for years (consider dissolvable medical sutures, now a $300 million industry). But the consumer items have a shorter history. In the early 1990s, biodegradable plastic bags and plates, made of conventional polymers, such [...]

  • Cost-effective process for biobased adipic acid

    Updated: 2011-05-31 04:02:54
    Rennovia, Inc., a California-based startup founded in 2009, is developing advanced chemo-catalytic processes for the conversion of renewable feedstocks to major market drop-in biobased chemicals. According to Rennovia’s CEO, Dr. Robert Wedinger, the company has successfully developed a process for its first target, adipic acid, using a proprietary chemo-catalytic conversion platform. Adipic acid is [...]

  • Renewable polyurethane from a byproduct of biodiesel production

    Updated: 2011-05-31 04:02:54
    Waste is a terrible thing to waste. That’s what’s guiding an Ohio State University researcher and a bioenergy entrepreneur in the development of a renewable source of polyurethane foam that’s expected to create up to 30 jobs in Mansfield, Ohio, in the next two years. The product, known as a bio-polyol, is made from [...]

  • Nouveaux emballages biosourcés

    Updated: 2011-05-31 04:02:54
    Dans les prochaines semaines, les petites bouteilles d’Actimel seront fabriquées à partir de plastique végétal. Danone a en effet annoncé que l’emballage de la célèbre petite boisson sera fabriqué à partir de polyéthylène d’origine végétale. « Nous avons passé un accord portant sur la fourniture de 10 000 tonnes de résine avec le fournisseur [...]

  • Bioplastics from chicken feathers

    Updated: 2011-05-31 04:02:54
    … Feathers, like hair and fingernails, are made up principally of the tough and chemically stable protein keratin, and can lend strength while reducing weight in the mixtures of plastics chemicals known as composites. Researchers at the US agricultural authority have even published research into the possibility of incorporating chicken feathers into plastics, as [...]

  • Fundamental Manufacturing Processes, Plastic Injection Molding

    Updated: 2011-05-28 21:21:32
    DescriptionInjection molding is the most common method of producing parts out of plastic material. It is an extremely versatile process that is capable of producing parts with a wide range of attributes. Using shop floor footage and animated sequences this video focuses on the injection molding machine and the injection mold to illustrate the injection [...]

  • Plastic Injection Molding: Manufacturing Startup and Management

    Updated: 2011-05-26 09:13:20
    Product DescriptionThe latest book in the Plastic Injection Molding Series addresses the many facets of running today’s molding companies including selecting the right equipment, identifying costs to determine price, making the most of available resources (including personnel), and complying with industry and quality standards. Also discussed are key company strategies that can determine whether a [...]

  • Plastic Injection Molding: Manufacturing Startup and Management

    Updated: 2011-05-25 03:12:21
    Product DescriptionThe latest book in the Plastic Injection Molding Series addresses the many facets of running today’s molding companies including selecting the right equipment, identifying costs to determine price, making the most of available resources (including personnel), and complying with industry and quality standards. Also discussed are key company strategies that can determine whether a [...]

  • Fundamental Manufacturing Processes, Plastic Injection Molding

    Updated: 2011-05-23 21:21:10
    DescriptionInjection molding is the most common method of producing parts out of plastic material. It is an extremely versatile process that is capable of producing parts with a wide range of attributes. Using shop floor footage and animated sequences this video focuses on the injection molding machine and the injection mold to illustrate the injection [...]

  • Global Competition Matrix Tooling Inc

    Updated: 2011-05-18 21:14:13
    , . Matrix Tooling , . Inc Search Home About Us Why Choose Matrix Employment Opportunities Contact Us Quality Policy Technical Programs Request a Quote Directions Services R D Product Development Design Services CAD CAM Platforms Technology Prototyping Tooling Services Machining Mold Types Prototypes Low High Cavitation Family Mold Stack Mold Unscrewing Molds Multiple Shot Hot Runner Cold Runner Insulated Runner Two Three Plate Unit Die Micromold Mold Repair Molding Services Materials Engineering Grade Resorbable Bioabsorbable Commodity Sampling Production Transfer Tooling Programs Cleanroom Molding Assembly Inspection Services Cross-sectional Scanning CSS First Article Melt Flow Moisture Analysis Markets Surgical Devices Medical Consumer Products Automotive Electronics News Press Releases

  • Global Competition Matrix Tooling Inc

    Updated: 2011-05-18 21:14:12
    , . Matrix Tooling , . Inc Search Home About Us Why Choose Matrix Employment Opportunities Contact Us Quality Policy Technical Programs Request a Quote Directions Services R D Product Development Design Services CAD CAM Platforms Technology Prototyping Tooling Services Machining Mold Types Prototypes Low High Cavitation Family Mold Stack Mold Unscrewing Molds Multiple Shot Hot Runner Cold Runner Insulated Runner Two Three Plate Unit Die Micromold Mold Repair Molding Services Materials Engineering Grade Resorbable Bioabsorbable Commodity Sampling Production Transfer Tooling Programs Cleanroom Molding Assembly Inspection Services Cross-sectional Scanning CSS First Article Melt Flow Moisture Analysis Markets Surgical Devices Medical Consumer Products Automotive Electronics News Press Releases

  • Plastic Part Design for Injection Molding: An Introduction

    Updated: 2011-05-13 21:35:06
    Product DescriptionProvides an overview of the design process for injection molded plastic parts. Describes an integrated approach to plastic part design and plastic material selection. DLC: Injection molding plastics. Plastic Part Design for Injection Molding: An Introduction Related Blogs Related Blogs on Plastic Part Design for Injection Molding: An Introduction Technorati Tags: design, Injection, injection molding plastics, [...]

  • The 2011 Report on Plastics Injection Molding Machines Weighing Up to 500 Tons Excluding Patterns and Molds: World Market Segmentation by City

    Updated: 2011-05-13 21:11:54
    Product DescriptionThis report was created for global strategic planners who cannot be content with traditional methods of segmenting world markets. With the advent of a “borderless world”, cities become a more important criteria in prioritizing markets, as opposed to regions, continents, or countries. This report covers the top 2000 cities in over 200 countries. It [...]

  • File Upload Matrix Tooling Inc

    Updated: 2011-05-10 22:38:42
    , . Matrix Tooling , . Inc Search Home About Us Why Choose Matrix Employment Opportunities Contact Us Quality Policy Technical Programs Request a Quote Directions Services R D Product Development Design Services CAD CAM Platforms Technology Prototyping Tooling Services Machining Mold Types Prototypes Low High Cavitation Family Mold Stack Mold Unscrewing Molds Multiple Shot Hot Runner Cold Runner Insulated Runner Two Three Plate Unit Die Micromold Mold Repair Molding Services Materials Engineering Grade Resorbable Bioabsorbable Commodity Sampling Production Transfer Tooling Programs Cleanroom Molding Assembly Inspection Services Cross-sectional Scanning CSS First Article Melt Flow Moisture Analysis Markets Surgical Devices Medical Consumer Products Automotive Electronics News Press Releases

  • Plastic Injection Molding: Manufacturing Startup and Management

    Updated: 2011-05-10 03:11:12
    Product DescriptionThe latest book in the Plastic Injection Molding Series addresses the many facets of running today’s molding companies including selecting the right equipment, identifying costs to determine price, making the most of available resources (including personnel), and complying with industry and quality standards. Also discussed are key company strategies that can determine whether a [...]

  • Microcellular Injection Molding

    Updated: 2011-05-08 21:21:46
    Product DescriptionThis book presents the most important aspects of microcellular injection molding with applications for science and industry. The book includes: experimental rheology and pressure-volume-temperature (PVT) data for different gas materials at real injection molding conditions, new mathematical models, micrographs of rheological and thermodynamic phenomena, and the morphologies of microcellular foam made by injection molding. [...]

  • Fundamental Manufacturing Processes, Plastic Injection Molding

    Updated: 2011-05-08 21:11:28
    DescriptionInjection molding is the most common method of producing parts out of plastic material. It is an extremely versatile process that is capable of producing parts with a wide range of attributes. Using shop floor footage and animated sequences this video focuses on the injection molding machine and the injection mold to illustrate the injection [...]

  • 1986 NISSEI 88-TON PLASTIC INJECTION MOLDING MACHINE

    Updated: 2011-05-05 03:11:46
    NISSEI 88-TON, MODEL FS80S12ANE, MACHINE #10, 5. 3 OZ (157 GRAMS), 1.57″ (40 MM) “C” SCREW, 1986, NPC-FFC1 CONTROLS, 14.76″ x 14.76″ (375 MM x 375 MM) TBS, 21.1″ x 21.1″ (535 MM x 535 MM) PLATENS, 20.1″ (685 MM) MAX DAYLIGHT WITHOUT SPACERS, 20 HP MOTOR, DIM: 15′7″L x 3′4″W x 6”H, WEIGHT: 7938 [...]

Current Feed Items | Previous Months Items

Apr 2011 | Mar 2011 | Feb 2011 | Jan 2011 | Dec 2010 | Nov 2010