• Biobased polymers capable of healing themselves

    Updated: 2011-02-28 22:46:13
    Michael Kessler has worked with polymers that repair themselves when they crack. And he’s worked with polymers made from vegetable oils. Now he’s working to combine the two technologies. Kessler, an Iowa State University associate professor of materials science and engineering and an associate of the U.S. Department of Energy’s Ames Laboratory, is researching and developing [...]

  • New polyamide from Biotechnology

    Updated: 2011-02-28 22:46:13
    One of the Institute of Biochemical Engineering’s (ibvt) major goals is the development of made-to-measure cell factories. The institute is part of the TU Braunschweig and is directed by Prof. Dr. Christoph Wittmann, a biotechnologist who has a great deal of experience in this field. … The ibvt is mainly focused on investigating the [...]

  • A future generation of biodegradable Polyester compounds

    Updated: 2011-02-28 22:46:13
    BASF Corporation announced that it has received a license from Metabolix under U.S. Patent No. 5,883,199, titled “Polylactic Acid-Based Blends,” to produce and market PLA (PolyLactic Acid) and PBAT (PolyButylene Adipate co-Terephthalate) compounds under the BASF trade name Ecovio®. Ecovio biodegradable polymer is a blend of Ecoflex® biodegradable aliphatic-aromatic copolyester (PBAT) and polylactic acid [...]

  • New collaboration for the production of biobased succinic acid

    Updated: 2011-02-28 22:46:13
    Myriant Technologies, Inc., a privately-held, biotech developer and manufacturer of renewable bio-based chemicals, announced the closing of a $60 million strategic equity investment from PTT Chemical Group, Thailand’s largest petrochemical producer. Myriant will utilize the investment for the ongoing development of its bio-based high-value chemicals technology, as well as to help fund the [...]

  • Biobased acrylic products at a lower price

    Updated: 2011-02-28 22:46:13
    OPX Biotechnologies Inc. (OPXBIO), a renewable chemical and biofuel company, announced that it has achieved the commercial bioprocess performance and cost goals for its first product, BioAcrylic. In just 18 months of pilot-scale development, OPXBIO has demonstrated a manufacturing process for making performance-equivalent BioAcrylic that is lower cost and more sustainable than petroleum-based acrylic. [...]

  • Global Biodegradable Polymers Market to Reach 825,000 Tons by 2015 – A market study!

    Updated: 2011-02-28 22:46:13
    The global market for Biodegradable Polymers is forecast to reach 825,000 Tons by the year 2015, according GIA (Global Industry Analysts), which announces the release of a comprehensive global report entitled “Biodegradable Polymers: A Global Strategic Business Report”. Principal factors driving growth include fast depletion of traditional sources of fossil fuel leading to the shift [...]

  • Introductions of bioplastics reached a crescendo during 2010 – A point of view!

    Updated: 2011-02-28 22:46:13
    … Introductions of bioplastic materials and products reached a crescendo during 2010, as more mainstream companies introduced bioplastics from a dizzying array of commodities. Beverage maker Odwalla, a Coca-Cola subsidiary, said it was switching all of its single-serve drinks to bottles made almost entirely of plastic derived from molasses and sugarcane juice. (In 2009, [...]

  • New biobased product label to boost demand for products made from renewable resources

    Updated: 2011-02-28 22:46:13
    The U.S. Department of Agriculture’s BioPreferred program announced that a final rule to initiate a voluntary product certification and labeling program for qualifying biobased products will be published in the Federal Register tomorrow. This new label will clearly identify biobased products made from renewable resources, and will promote the increased sale and use of these [...]

  • Production of of green chemicals and bioproducts – Video presentation

    Updated: 2011-02-28 22:46:13
    Rivertop Renewables™ is creating an abundant and economical supply of green chemicals and bioproducts. Rivertop™ products are biodegradable and built from renewable plant sugars. – Related posts / Billets à lire, en complément : Progressive Chemistry – Video presentation ‘Green Plastics’ Search in Database Renewable chemicals – A market study! </p Share, Enjoy and Subscribe: Tweet

  • PHAs market in packaging is still extremely small – A point of view!

    Updated: 2011-02-28 22:46:13
    … PHAs are linear polyesters naturally produced by bacterial fermentation of sugar or lipids. Telles, the US-based bioplastics joint venture between renewable chemical company Metabolix and agribusiness firm Archer Daniels Midland (ADM) is ramping up the world’s largest commercial-scale PHA plant in Clinton, Iowa, US, designed to produce 110m lb/year (50,000 tonnes/year) of the corn-based plastic under [...]

  • Increase of the production of biobased plasticizer

    Updated: 2011-02-28 22:46:13
    Segetis, Inc., a leading biobased chemicals innovator, announced that construction is underway on expanded production capacity for the manufacture of the company’s solvent and non-phthalate plasticizer products. Scheduled for completion by summer 2011 and located at a contract manufacturing partner in the Upper Midwest (USA), the new facility will be capable of producing several [...]

  • Strong development of bioplastic plants in Thailand

    Updated: 2011-02-28 22:46:13
    US-based NatureWorks LLC, the world’s top bioplastics company, will decide this quarter whether Thailand will be the site of its new polylactic acid (PLA) plant. Marc Verbruggen, the president and chief executive, said his company was nearing a decision on the location of the plant, which will be operational in 2014 or 2015 and [...]

  • A new biorefinery based on cellulose fibres from wheat straw, in China

    Updated: 2011-02-28 22:46:13
    Chempolis Ltd and Henan Yinge Industrial Investment Co., Ltd signed a frame agreement on establishing a joint venture in Luohe, Henan province (China). The proposed JV company will build a biorefinery based on Chempolis formicofib™ technology using wheat straw as raw material. Biorefinery will produce annually 160 000 tons of non-wood papermaking fibres and biochemicals. [...]

  • Bugs produce bioplastics (PHA) from Waste

    Updated: 2011-02-28 22:46:13
    Polyhydroxyalkanoates (PHA) can be produced in different ways, chemically or biologically, by fermentation from feedstock. This family comprises mainly a homopolymer, polyhydroxybutyrate (PHB), and different copolyesters, polyhydroxybutyrate co-hydroxyalkanoates such as polyhydroxybutyrate co-hydroxyvalerates (PHBV), or polyhydroxybutyrate co-hydroxyhexanoate (PHBHx), polyhydroxybutyrate co-hydroxyoctonoate (PHBO) and polyhydroxybutyrate co-hydroxyoctadecanoate (PHB0d). PHB is a natural polymer. It is an intracellular storage [...]

  • Renewable polyurethanes based on carbon dioxide

    Updated: 2011-02-28 22:46:13
    Bayer is taking a new direction in the production of high-quality plastics with the help of carbon dioxide (CO2) from the energy sector. A pilot plant has come on stream at Chempark Leverkusen (Germany) to trial the new process on a technical scale. The plant produces a chemical precursor into which CO2 is incorporated [...]

  • Bioplastic Recycling Infrastructure: PLA sorting – Video presentation

    Updated: 2011-02-28 22:46:13
    Sorting PLA in recycling facilities is difficult due to low volumes and in many cases, the PLA container looks like PET. For high volume recycling facilities, who have installed the latest equipment, an optical sort machine can scan and sort PLA from PET or HDPE at high speeds (Biocor). PLA Sorting from Blake Hedlund [...]

  • Bioplastic from non-edible starch

    Updated: 2011-02-28 22:46:13
    BIOPAR®, from BIOP Biopolymer Technologies AG (Dresden-Germany), is a non-edible potato starch based biopolymer with the capability to 100% biodegrade – EN 13432 – into water and carbon. Biodegrades in the environment by the help of the micro organism present in this environment. There is no need to compost it in an industrial composting facility but [...]

  • Bioplastics symbol contest – Video presentation

    Updated: 2011-02-28 22:46:13
    The “Make Your Mark” design competition is looking for a symbol that represents “bioplastics.” The symbol will indicate that a product is made from “green,” bio-based material … This contest is organized by Cereplast Inc.. – Related posts / Billets à lire, en complément : How bioplastics are made? – Video presentation Bioplastics close in price to regular plastic – A point of view! Best and worst of bioplastics – A point of view! Share, Enjoy and Subscribe: Tweet

  • Next generation of biobased Epoxy Resins

    Updated: 2011-02-28 22:46:13
    Solvay is studying the construction of an epichlorohydrin production plant in Taixing, China, with an initial capacity of 100,000 tons per year.  The plant, which is expected tostart producing in 2013, will be based on  innovative Epicerol® technology.  The plant is set to serve the  rapidly growing Chinese epichlorohydrin market, which currently represents 29% of the [...]

  • Not enough renewable feedstock? – A point of view!

    Updated: 2011-02-28 22:46:13
    The question addressed is the availability of bio-renewable feedstocks for bioplastics applications in the future. A point of view: Of all the crude oil that is used p.a. about 40% goes to the mayor energy supplying companies world-wide, for the generation of electrical power etc. 35% is used for domestic heating manufactory facilities and [...]

  • What is Green Chemistry? – Video presentation

    Updated: 2011-02-28 22:46:13
    In 1991, when he was a 28-year-old staff chemist at the US Environmental Protection Agency (EPA), Paul Anastas invented the term ‘green chemistry’ — an approach to chemical production that called for the elimination of toxic processes at the outset, instead of cleaning up hazardous waste after the fact. In 1998, when director of the [...]

  • A new family of biocomposites, based on bioplastics

    Updated: 2011-02-28 22:46:13
    Biobent Polymers™, a new division of global plastics manufacturer Univenture, launched its Panacea™ family of bioplastics. The new biocomposite is the industry’s first bioplastic resin to maintain the characteristics of the base plastic material while replacing up to 40% of the petroleum normally used in plastics manufacturing. The award-winning technology behind Panacea™ was [...]

  • Increase of the bioplastic production in Germany

    Updated: 2011-02-28 22:46:13
    BASF has started operations at its expanded plant for the production of the biodegradable plastic Ecoflex®. Expansion of the existing plant in Ludwigshafen (Germany) will increase production capacity for Ecoflex from 14,000 to 74,000 metric tons per year. At the same time, BASF will ramp up compounding capacity for Ecovio®, a derivative of Ecoflex. [...]

  • New biobased and biodegradable thermoset resins

    Updated: 2011-02-28 22:46:13
    Modern synthetic resins are made from fossil sources, are not biodegradable and can only be burned under strict precautions due to the release of toxic substances. Prof. Gadi Rothenberg and Dr. Albert Alberts of the University of Amsterdam (UvA) have discovered a range of new thermoset resins made from renewable raw materials which are [...]

  • Bioplastics market is still growing – A point of view!

    Updated: 2011-02-28 22:46:13
    … As part of a growing global trend, plastics made from plant materials—biodegradable plastics, or bioplastics—are being used for everything from snack chip bags to makeup packaging, disposable cups, and food containers. Companies including Cargill Inc.’s NatureWorks LLC, Proctor & Gamble Co., Johnson & Johnson, Inc., and Paper Mate have all introduced products that [...]

  • How is biobased PET manufactured?

    Updated: 2011-02-28 22:46:13
    PlantBottle PET plastic beverage bottles are made with up to 30 percent of their PET material derived from plants. The Coca-Cola Company has worked with partners to develop a process for making PET plastic bottles that contain a blend of traditional material and up to 30 percent plant-based material. The plant-based material is [...]

  • New fraganced bioplastics

    Updated: 2011-02-28 22:46:13
    There is fresh and clean, then there is fresh, clean and green. The personal care, cosmetics, and fragrance industry has been focusing on the growing and responsible trend of “greening up” products. Aromatic Fusion, Inc. is not an exception to this, but rather working to help lead the evolution of materials into a greener [...]

  • Innovative microbial process to convert raw sewage into bioplastics – Video presentation

    Updated: 2011-02-28 22:46:13
    Ryan Smith is co-founder and chief technical officer of Micromidas, Inc., a biotech company that uses an innovative microbial process to convert raw sewage into high-quality bioplastics. Ryan Smith: Sewage Into Plastic from PopTech on Vimeo. – Related posts / Billets à lire, en complément : To convert sludge into bioplastics To turn waste into bioplastic Producing recyclable bioplastics – Video presentation Share, Enjoy and Subscribe: Tweet

  • Recycling Mysteries: Tires

    Updated: 2011-02-28 08:39:47
    Let’s be honest: Tires make the world go round. Unless you’re a professional speed walker, your method of transportation probably involves tires of some sort. But these tires don’t last forever. Whether it’s an irreparable flat or loss of tread, eventually tires need to be replaced. Some tires can be retreaded for a second life, but [...]

  • Roadblocks to Car Seat Recycling

    Updated: 2011-02-28 08:32:46
    Of all the equipment new parents acquire, an infant car seat is the only one required by law. But as kids get bigger, so do their safety seats. State child restraint laws extend to up to age eight in some places, which means that as they grow, kids pass through two or three types of seats [...]

  • How to Extend Life of the Rubber and Plastic Products

    Updated: 2011-02-28 07:48:45
    We all use many things that are derived from either plastic or rubber. Hence, its safe to say, that plastic and rubber products make an important part of our day-to-day life. However, the life of Plastic and Rubber parts is not much. Proper care should be taken to increase their life. Plastic is a word [...]

  • Effects of Polystyrene Block Content on Morphology and Adhesion Property of Polystyrene Block Copolymer

    Updated: 2011-02-28 06:41:25
    . Contact us Help Shopping cart Home About us Article title , keywords or abstract Article title Publication title Author Advanced search Subject Publisher Publication Browse : by Home Journal of Adhesion Science and Technology Volume 25, Number 8 Effects of Polystyrene Block Content on Morphology and Adhesion Property of Polystyrene Block Copolymer Authors : Nakamura , Yoshinobu 1 Adachi , Manabu 2 Kato , Yosuke 2 Fujii , Syuji 2 Sasaki , Mariko 3 Urahama , Yoshiaki 4 Sakurai , Shinichi 5 : Source Journal of Adhesion Science and Technology Volume 25, Number 8, 2011 pp . 869-881(13 Publisher : VSP , an imprint of Brill view table of contents next article Buy download fulltext : article OR Pressing the buy now button more than once may result in multiple purchases Price : 35.00 plus tax

  • Studies on Performance of Cured Water-Borne MelamineAcrylic Emulsion Coatings

    Updated: 2011-02-28 06:41:24
    . Contact us Help Shopping cart Home About us Article title , keywords or abstract Article title Publication title Author Advanced search Subject Publisher Publication Browse : by Home Journal of Adhesion Science and Technology Volume 25, Number 8 Studies on Performance of Cured Water-Borne Melamine-Acrylic Emulsion Coatings Authors : Han , Renlu 1 Zhang , Yifan 2 : Source Journal of Adhesion Science and Technology Volume 25, Number 8, 2011 pp . 883-892(10 Publisher : VSP , an imprint of Brill view table of contents next article Buy download fulltext : article OR Pressing the buy now button more than once may result in multiple purchases Price : 35.00 plus tax Refund Policy : Abstract In this study , water-borne coating formulations which could be cured quickly were prepared using acrylic

  • Adhesive Properties of Cyanoethyl Starch

    Updated: 2011-02-28 06:41:18
    Contact us Help Shopping cart Home About us Article title , keywords or abstract Article title Publication title Author Advanced search Subject Publisher Publication Browse : by Home Journal of Adhesion Science and Technology Volume 25, Number 8 Adhesive Properties of Cyanoethyl Starch Author : Nwokocha , Louis . M 1 : Source Journal of Adhesion Science and Technology Volume 25, Number 8, 2011 pp . 893-902(10 Publisher : VSP , an imprint of Brill view table of contents Buy download fulltext : article OR Pressing the buy now button more than once may result in multiple purchases Price : 35.00 plus tax Refund Policy : Abstract Cassava starch was cyanoethylated to different degrees of substitution DS and then used in adhesive preparations . The adhesives were used in bonding wood substrates

  • The 2011-2016 World Outlook for Plastics Injection Molding Machines Weighing Up to 500 Tons Excluding Patterns and Molds

    Updated: 2011-02-27 20:11:37
    Product DescriptionThis econometric study covers the world outlook for plastics injection molding machines weighing up to 500 tons excluding patterns and molds across more than 200 countries. For each year reported, estimates are given for the latent demand, or potential industry earnings (P.I.E.), for the country in question (in millions of U.S. dollars), the percent [...]

  • Fundamental Manufacturing Processes, Plastic Injection Molding

    Updated: 2011-02-25 08:22:48
    DescriptionInjection molding is the most common method of producing parts out of plastic material. It is an extremely versatile process that is capable of producing parts with a wide range of attributes. Using shop floor footage and animated sequences this video focuses on the injection molding machine and the injection mold to illustrate the injection [...]

  • Smart Set Genius Plastic Injection Molding Control for sale on eBay

    Updated: 2011-02-25 08:11:27
    Please visit my eBay store for this control package, and for the technical specifications. stores.ebay.com This control was never used, we bought it as a backup control, as we installed 7 of them on older machines, and we wanted a backup, in case… Well, the “in case” never happened, but the machines themselves ended up [...]

  • Fundamental Manufacturing Processes, Plastic Injection Molding

    Updated: 2011-02-24 02:12:43
    DescriptionInjection molding is the most common method of producing parts out of plastic material. It is an extremely versatile process that is capable of producing parts with a wide range of attributes. Using shop floor footage and animated sequences this video focuses on the injection molding machine and the injection mold to illustrate the injection [...]

  • Going for Plastic Bumpers Repair to Avail Maximal Benefit

    Updated: 2011-02-21 01:22:54
    Plastic bumpers come in different sizes and shapes according to their area of application. They are known to offer excellent grips and offer resistance against shock and vibration. Nowadays, both plastic and rubber bumpers find widest application in the automotive industry. They protect the front part of any vehicle during unwarranted accidents. They provide ultimate protection [...]

  • 1970-74 interior Barracuda DOOR PANELS- Injection molding Black

    Updated: 2011-02-20 08:21:24
    Product Description HARD TOOLED, PLASTIC INJECTED as Original, CUDA DOOR PANELS Sold by the pair, Fronts only.THESE Black PANELS are READY TO MOUNT. UNLIKE CURRENT AFTERMARKET DOOR PANELS, THESE PANELS INCLUDE THE CORRECT BRACING AND BACK SIDE STRUCTURE! WE HAVE ALSO PAID PARTICULAR ATTENTION TO GET THE GRAINED TEXTURE CORRECT.The cutout is for manual [...]

  • Fundamental Manufacturing Processes, Plastic Injection Molding

    Updated: 2011-02-20 08:11:20
    DescriptionInjection molding is the most common method of producing parts out of plastic material. It is an extremely versatile process that is capable of producing parts with a wide range of attributes. Using shop floor footage and animated sequences this video focuses on the injection molding machine and the injection mold to illustrate the injection [...]

  • Service and Sales in the Injection Molding Business Matrix Tooling Inc

    Updated: 2011-02-19 05:11:45
    , . Matrix Tooling , . Inc Search Home About Us Why Choose Matrix Employment Opportunities Contact Us Quality Policy Technical Programs Request a Quote Directions Services R D Product Development Design Services CAD CAM Platforms Technology Prototyping Tooling Services Machining Mold Types Prototypes Low High Cavitation Family Mold Stack Mold Unscrewing Molds Multiple Shot Hot Runner Cold Runner Insulated Runner Two Three Plate Unit Die Micromold Mold Repair Molding Services Materials Engineering Grade Resorbable Bioabsorbable Commodity Sampling Production Transfer Tooling Programs Cleanroom Molding Assembly Inspection Services Cross-sectional Scanning CSS First Article Melt Flow Moisture Analysis Markets Surgical Devices Medical Consumer Products Automotive Electronics News Press Releases

  • Service and Sales in the Injection Molding Business Matrix Tooling Inc

    Updated: 2011-02-19 05:11:44
    , . Matrix Tooling , . Inc Search Home About Us Why Choose Matrix Employment Opportunities Contact Us Quality Policy Technical Programs Request a Quote Directions Services R D Product Development Design Services CAD CAM Platforms Technology Prototyping Tooling Services Machining Mold Types Prototypes Low High Cavitation Family Mold Stack Mold Unscrewing Molds Multiple Shot Hot Runner Cold Runner Insulated Runner Two Three Plate Unit Die Micromold Mold Repair Molding Services Materials Engineering Grade Resorbable Bioabsorbable Commodity Sampling Production Transfer Tooling Programs Cleanroom Molding Assembly Inspection Services Cross-sectional Scanning CSS First Article Melt Flow Moisture Analysis Markets Surgical Devices Medical Consumer Products Automotive Electronics News Press Releases

  • Blog Matrix Tooling Inc

    Updated: 2011-02-19 05:11:42
    , . Matrix Tooling , . Inc Search Home About Us Why Choose Matrix Employment Opportunities Contact Us Quality Policy Technical Programs Request a Quote Directions Services R D Product Development Design Services CAD CAM Platforms Technology Prototyping Tooling Services Machining Mold Types Prototypes Low High Cavitation Family Mold Stack Mold Unscrewing Molds Multiple Shot Hot Runner Cold Runner Insulated Runner Two Three Plate Unit Die Micromold Mold Repair Molding Services Materials Engineering Grade Resorbable Bioabsorbable Commodity Sampling Production Transfer Tooling Programs Cleanroom Molding Assembly Inspection Services Cross-sectional Scanning CSS First Article Melt Flow Moisture Analysis Markets Surgical Devices Medical Consumer Products Automotive Electronics News Press Releases

  • Cube4U 3X3 Gas-Aided Injection Molding Speed Cube White

    Updated: 2011-02-17 20:20:48
    Compact and portable handheld design Solve it by making each side one solid color Product DescriptionThis C4U (a.k.a MHZ, Cube4U, Cube4You) Gas Aided Injection Molding 3X3 Speed Cube is a novel version of the popular C4U 3X3 cube series. C4U cubes are highly regarded by most cubers for their excellent ability to cut corners. They also tend [...]

  • Plastic Injection Molding: Manufacturing Startup and Management

    Updated: 2011-02-09 02:11:27
    Product DescriptionThe latest book in the Plastic Injection Molding Series addresses the many facets of running today’s molding companies including selecting the right equipment, identifying costs to determine price, making the most of available resources (including personnel), and complying with industry and quality standards. Also discussed are key company strategies that can determine whether a [...]

  • Plastic Injection Molding Company

    Updated: 2011-02-06 14:11:12
    Mountain Moid & Die, Inc. 127 River Bend Drive Sevierville, TN 37876 www.mtnmold.com 865-428-3611 Related Blogs Related Blogs on Plastic Injection Molding Company Technorati Tags: company, Inc., Injection, injection molding company, Moid, Molding, Mountain, Plastic, plastic injection molding, plastic injection molding company

  • Cube4U 3X3 Gas-Aided Injection Molding Speed Cube Black

    Updated: 2011-02-05 08:21:14
    Compact and portable handheld design Solve it by making each side one solid color Product DescriptionThis C4U (a.k.a MHZ, Cube4U, Cube4You) Gas Aided Injection Molding 3X3 Speed Cube is a novel version of the popular C4U 3X3 cube series. C4U cubes are highly regarded by most cubers for their excellent ability to cut corners. They also tend [...]

Current Feed Items | Previous Months Items

Jan 2011 | Dec 2010 | Nov 2010 | Oct 2010 | Sep 2010 | Aug 2010