• 4 Videos for What's New in CAMWorks 2009

    Updated: 2012-01-31 23:26:17
    CAMWorks 2009 has over 100 user driven features and enhancements to enable users to program parts faster and more easily than ever before. In addition, a significant number of new machining options increase CAMWorks already strong manufacturing capabilities.

  • Vacancy – AutoCAD Operator (2012/5090)

    Updated: 2012-01-31 09:22:26
    Our client has an opening for an AutoCAD Operator with an electrical bias. The candidate will only require very basic experience and will be carrying out design work on wiring diagrams, schematics, control panels, interconnections and blocks etc. The candidate will be based in Hull for 3 months plus.

  • compatibility between different versions of LT

    Updated: 2012-01-31 01:05:24
    Can I take dwgs from Autocad 2012 LT back into the previous version of LT to work on them and if so how

  • Plotting Text

    Updated: 2012-01-30 18:17:27
    I would like to find out if there is a way to plot text in a filled or colored in method as shown on the Plot Preview screen

  • Vacancy – Design Draughtsperson (2012/5087)

    Updated: 2012-01-30 10:46:04
    Our client has a permanent position available for an experienced Design Draughtsperson in Broxburn, West Lothian. The full Job Description can be viewed on the CAD Vacancies section of our website.

  • isolate and unisolate

    Updated: 2012-01-29 05:11:47
    when working in paper space, I'd isolate a layer to change some settings then when i unisolate the layers located in the view port shows back up but turns

  • Vacancy – AutoCAD Design Draughtsperson (2012/5085)

    Updated: 2012-01-27 14:34:00
    Our client requires an experienced AutoCAD Design Draughtsperson with a general mechanical background. Work will include resizing, making modifications and changes to existing designs. The candidate will be based in Ebbw Vale, Gwent for 1 month.

  • Vacancy – Design & Development Engineers (2012/5084)

    Updated: 2012-01-27 09:40:25
    Our client, a global operation, have an exciting opportunity for two experienced electro-mechanical Design & Development Engineers to join their team for 6 months. Experience with SolidWorks or a similar 3D CAD package is required. The candidates will be based in Glenrothes, Scotland.

  • The AutoCAD CAL Command

    Updated: 2012-01-27 00:28:12
    Home About Index Polls Archives Follow cadpanacea Popular Content : Today's DWG Trueconvert download AutoCAD 2012 in 3 minutes AutoCAD 2010, Free trial How to disable the ViewCube in AutoCAD The AutoCAD CAL Command Top Categories AutoCAD Tips Augi Lisp Civil 3D Autodesk Programming Free AutoCAD LT AutoCAD 2008 AutoCAD 2011 AutoCAD 2010 Autodesk University Mac AU Autolisp VBA Design Review AU2011 Forums AU2010 Linetypes Raster Design AutoCAD WS DWG Trueview CADalyst MDI AutoCAD 2009 Tips and Tricks PDF more tags Recent comments CTRL+V Paste 3 weeks 1 day ago Would this ARX file work for 6 weeks 6 hours ago Good one Paul I suspect both 6 weeks 7 hours ago Great Tip McSwain Never 6 weeks 7 hours ago Open AutoCAD while launching a sheet set 6 weeks 8 hours ago Thanks for the comment . Would 10

  • AutoCAD Scale Mix Up

    Updated: 2012-01-26 05:29:22
    Hi, I'm in a bit of a bind and am wondering if you could help! It has been quite a while since I did AutoCAD drawings (couple of years) and cannot remember

  • Which Way Next from CEO Carl Bass – Autodesk

    Updated: 2012-01-25 16:42:13
    Number of View :144

  • Decisions – Analyzing Possible Solutions

    Updated: 2012-01-25 15:25:23
    Develop potential solutions Now comes the step where you start brainstorming decisions and possible options that may generate positive outcomes.  In a pinch you will move through these steps quickly.  When you have time, you can think a little more on these items.   Decision-making is not as involved as Strategic Planning, but it impacts your [...]

  • Vacancy – AutoCAD Draughtsperson (2012/5079)

    Updated: 2012-01-25 10:40:50
    Our client has a short term role available for an experienced 2D AutoCAD Draughtsperson with experience of the finishing industry. The candidate will be working on the design of sheet metal work and must also be proficient in the use of Microsoft Word. The position is to be based in Netherton for 2 months.

  • Vacancy – AutoCAD Draughtsperson (2012/5078)

    Updated: 2012-01-25 10:04:54
    Our client is looking for an experienced AutoCAD Draughtsperson with a general mechanical background and a wide range of engineering expertise. The role is to be based in Rotherham, South Yorkshire for 3 months.

  • Decisions – Identify Limiting Factors and Constraints

    Updated: 2012-01-24 14:48:47
    When decision time comes there are always limiting items that come in to play.  Knowing the limits and constraints will improve your decision making by placing boundaries around the extents of what could be done. These boundaries may include time constraints that limit the time you can take in the progress of the change or [...]

  • Vacancy – AutoCAD/Inventor Design Engineer (2012/5069)

    Updated: 2012-01-23 15:00:11
    Our client has a position available for an experienced Design Engineer with experience of AutoCAD and Inventor. The candidate will ideally possess a good general mechanical background, however good experience with the CAD packages is most important.

  • Vacancy – Mechanical Engineer/Site Supervisor (2012/5068)

    Updated: 2012-01-23 14:34:54
    Our client requires a Mechanical Engineer/Site Supervisor for 3-6 months, possibly turning permanent. The candidate should have health & safety experience and must possess a CSCS Gold Card along with either a SSSTS, SSMTS or CITB managers course qualification. The candidate will be based in the South and will be travelling between Bedford, Canwick and [...]

  • Vacancy – SolidWorks Design Draughtsperson (2012/5067)

    Updated: 2012-01-19 11:31:40
    Our client requires a SolidWorks Design Draughtsperson with general mechanical experience. The candidate will be taking a 3D model and producing 2D detailed drawings from it under supervision. The position is for 3 weeks plus and will be based in Ringwood, Hampshire.

  • iPhone sync to iTunes, no, no, no, yes! No

    Updated: 2012-01-19 11:06:30
    This solution from Get Satisfaction worked for me. I had a total refusal to sync until some direct to phone downloaded podcasts were deleted. my iPhone won't sync to iTunes - getsatisfaction.com In the end my issue was related to...

  • Vacancy – AutoCAD Draughtsperson (2012/5062)

    Updated: 2012-01-19 09:58:30
    Our client is looking for a permanent member of staff to join their team. An AutoCAD 2D Draughtsperson is required with a general mechanical background. Any knowledge or experience of civil engineering will be beneficial but is not essential, as training will be given. The position is to be based in Birmingham.

  • Dark times, dark sites

    Updated: 2012-01-18 05:40:06
    This site has gone dark for a day to support the movement against the proposed SOPA and PIPA bills. Rather than black out the whole site for a day like Wikipedia and thousands of other sites, I have decided to keep the blog somewhat usable. SOPA is really, really scary stuff. If you’re an [...]

  • Decisions – Gathering information

    Updated: 2012-01-16 16:32:38
    Our topic is decisions.  As we all know, decisions are based on the available information you have to process prior to making the call.  If you have very little information to go on, you run the risk of making the wrong choice.  If you gather too much, then sometimes it clouds the water. Some decisions [...]

  • DIMENSIONS SIZE

    Updated: 2012-01-16 16:17:20
    Basically I am a beginner to AutoCAD however I am starting to do drawings for my company. However I can do all the 2D stuff, but when I put them in viewports

  • Wood Grain Pattern on Soild Objects

    Updated: 2012-01-16 16:15:43
    I am using AutoCAD 2004. I am making 3D objects that are going to be made out of wood. I would like the shade or color of the object to have a natural

  • Inserting PDF Files Into drawings

    Updated: 2012-01-16 16:15:19
    I am trying to insert a PDF file onto a drawing. I have a very detailed submittable I want to insert into one of my drawings, the vendor will not send

  • LOCKED X-REF

    Updated: 2012-01-16 16:14:31
    How do I lock my x-ref drawing in my sheet without having it fade out? My fade control is already set at a -90. Thank

  • Custom linetypes will not plot when batch plotting (publish)

    Updated: 2012-01-16 16:14:07
    I created a custom linetype using a shape (.shp) file I created. It appears when plotting individually, but not when trying to publish. No error message

  • Heidi missing? But I can see her!

    Updated: 2012-01-12 10:37:20
    My desktop background is a random selection from my Flickr photos and changes hourly. Today I ’switched users’ to another account, to check something, and upon returning to my original logon found this AutoCAD error dialog. Perhaps you have to...

  • Re-Ordering AutoCAD Entities

    Updated: 2012-01-11 04:11:12
    Dear Sir, I am in trouble with re-ordering the entities within a selection (for example by ssget function). I have tried to denote an exact serial number

  • On Shaan’ 14 Years at Autodesk

    Updated: 2012-01-10 11:40:33
    Seeing Shaan’s post & photo montage celebrating his Autodesk anniversary also brought back many memories for me. Curiously I’ve also been at TWL about 14 years, also having previously spent 3 years max in a role, so can relate to...

  • Defining the Problem

    Updated: 2012-01-09 15:47:56
    You cannot decide what to do next until you know what or where there is a problem or opportunity for progress.  Identifying these is the first step. Problems and issues that come up are easy to identify.  They present themselves every day and just need to be addressed.  But what exactly are you looking for?  [...]

  • Adding attributes to existing blocks.

    Updated: 2012-01-05 17:47:19
    Is it possible to add attributes to existing blocks? I tried to do it within block editor but it doesn't seem to work

  • 1:1 Paper Error

    Updated: 2012-01-05 17:43:12
    Why does the paper cut off before the full dwg is printed when printing 1:1? I have input a custom paper size of 594x8800 however the paper is cutting

  • Point Dimension Autocad 2004

    Updated: 2012-01-05 17:40:51
    In standard Autocad, can you have a dimension box or something that would give me the X & Y dimension of a point. Almost similar if you were to do a LIST?

  • Decisions, decisions…

    Updated: 2012-01-05 14:44:20
    Managers and line workers are called on to make decisions every day. Some are small and can be processed quickly and others are major efforts. Learning to make good decisions takes time and usually takes a lot of bad decisions into account. How do you work through the decisions you make? Do you have a [...]

Current Feed Items | Previous Months Items

Dec 2011 | Nov 2011 | Oct 2011 | Sep 2011 | Aug 2011 | Jul 2011